5 thoughts on “What is the ring size? How to measure the ring size?”

  1. There are many ways to measure the size of the ring, but in general, it is divided into three types, one is diameter method, the other is the perimeter method, and the other is the special ring ruler measurement.
    . diameter method
    The diameter method is also divided into two types. One is to directly measure the rings that are usually worn. Holding a comfortable ring, flattened on the ruler engraved with the read number, how many centimeters are the maximum diameter of the ring ring inner ring, and then the number obtained by the obtained diameter is used.
    The other is to measure the finger directly. Use a straight ruler to compare the diameter of the finger, and the scale of the edge of the finger is the diameter of the ring. Or use a rigid caliper to measure the diameter of your fingers. But there is a disadvantage in the diameter method, that is, the error is relatively large.
    Because each person's joints are different, the ring must pass through the joints, so the size of the joint will also seriously affect the size of the ring.
    . The circumference of the perimeter
    The permeal method can also be divided into three types according to the different materials used. The easiest is the note. First use a small note around your fingers, then cut the note and pull straight, use a ruler to measure the length of the note, and then use the ring size to compare the size. The rope is the same as the note. The length is measured after wound, and the size is obtained.
    The above two methods have a disadvantage, that is, the measurement of the root refers to the length of the root. Without the joints, there will still be a certain error. So the third is to measure with wire. Use the wire simulation ring to make a circular iron ring around the fingers, and try to put on the iron ring many times, so that the iron ring is fixed and the lower left is marked. After removing the iron ring, the measuring length is expanded into a straight line, and then the inch is obtained according to the control table. It is best to use the non -elastic copper wire wire. This method error is the smallest, but the materials are not easy to find.
    . The measurement method of the ring ruler
    The general store will have a special ring ruler. Put the ring ruler on the fingers. After the size is adjusted, the number of readings will be recorded.
    If inch that is measured by a specific ruler of a specific brand, it must be accurate. However, if the diameter or circumstances that are measured, the obtained obtained by comparing the comparison table of the corresponding brand ring size is accurate. The key issue is that the ring size of different brands adopts different standards.

  2. 00:00 / 00: 5670% shortcut keys to describe space: Play / suspend ESC: exit full screen ↑: increase volume 10% ↓: reduced volume decrease by 10% →: single fast forward 5 seconds studio Here you can drag no longer appear in the player settings to reopen the small window shortcut key description

  3. With the ring size control table, you should find a wire around your fingers, then take it down and use the ruler to measure the length of the week. However, I have never used the ring size comparison table. When I bought a diamond ring for my wife, I went to the physical store, called Levis. They measured the ring size very accurate, and their diamond rings mean. In the between life, I followed the same life ', my wife was so embarrassed.

  4. Measuring the ring size one is to directly measure the diameter of your girlfriend's ring, and then refer to the size of the size to get the ring size; You can know the ring size of the ring size and control table. Generally, there will always be errors if you measure it yourself, you can measure it a few times, or go to the jewelry shop to measure. By the way, the ring size of the ring used by different brands is different. For example, men can only customize one Darry Ring in their lives.

  5. Popular science | How to measure the size of the ring more accurate

    n00:00 / 00: 2870% shortcut keys to describe space: Play / pause ESC: Exit full screen ↑: increase volume 10% ↓: decreases by 10% →: Single fast forward 5 seconds studio Here you can drag no longer appear in the player settings to reopen the small window shortcut key description

Leave a Comment